Singapore guide

Freelance project pricing in Singapore: check margin, markup and your own time

Check a freelance project fee against external costs, your own time and payment timing. Worked SGD examples explain margin versus markup and link to free tools.

Updated 22 November 2026. Information only, not personalised advice.

A fixed project fee can look attractive until you count supplier costs, unpaid preparation and revisions. Before sending a quotation, check three things separately: the cash costs of delivery, the time you will spend and when the client is expected to pay.

This worksheet is for Singapore freelancers quoting ordinary services in SGD. The examples assume a non-GST-registered sole proprietor and exclude GST. They are pricing illustrations, not recommended market rates, tax computations or promises of profit.

Start with the fee and costs you have actually listed

Suppose you are considering a S$2,000 project fee, S$800 of external delivery costs and 30 hours of your own work, including preparation and administration. All figures are invented.

Project pricing worksheet, SGD
Question Calculation Example result
What remains after the listed external costs? S$2,000 − S$800 S$1,200
What share of the fee is that remainder? S$1,200 ÷ S$2,000 × 100 60%
What percentage is added above those costs? S$1,200 ÷ S$800 × 100 150%
What remains per hour of your own time? S$1,200 ÷ 30 S$40/hour

The 60% and 150% use different denominators. Margin uses the selling fee; markup uses the cost base. They are not interchangeable. Here, both use only the external costs explicitly listed, so neither establishes your business’s net profit margin.

The S$1,200 still has to support your own work, any overhead not included, tax and MediSave provisions, and other obligations. ACRA’s financial-ratio guidance defines net profit margin using profit after all costs and tax; do not present this limited project remainder as that measure.

Allow for your own time before treating the remainder as spare money

If you choose S$40 an hour as a personal pricing allowance, 30 hours uses the whole S$1,200 remainder. Nothing is left in this simplified model for other overhead or a further contingency. This is your modelling assumption, not an employee salary entitlement or a tax deduction.

For a sole proprietor, IRAS lists your own salary and drawings among disallowable business expenses. Keep the allowance you use to evaluate a quotation separate from the tax treatment of payments. Taxable net trade income requires its own records and adjustments.

Test the extra revision before agreeing the price

If the same S$2,000 fee takes 40 hours instead of 30, the S$1,200 remainder works out to S$30 an hour. To preserve a S$40 hourly allowance with 40 hours and the same S$800 external costs would require S$2,400 before other overhead or contingency: S$800 + 40 × S$40. That is S$400 above the original fee.

The calculation shows the effect of scope, not an automatic right to charge more. Agree deliverables, included revisions and changes with the client. Use the quotation checklist and keep a written record of the terms you actually agree.

Check cash timing independently

A proposed S$2,000 invoice is not S$2,000 already available to spend. If S$800 must be paid to suppliers before the client pays, identify how that payment will be funded. If only S$600 has arrived, show S$600 as cash received and track the outstanding balance separately. Do not change the agreed project fee merely to make the bank balance match.

Keep the estimate, issued invoice, actual receipts and paid costs in separate columns. A profitable-looking quotation can still create an early cash shortfall. See the dated cash-flow example for a method that also works for consultants and other independent workers.

Work backwards from a clearly defined cost base

For a pricing worksheet, price = modelled costs ÷ (1 − target margin as a decimal). This only works if the target is below 100% and you specify which costs are included. A margin on a limited cost base is not the business’s net profit margin.

Original non-GST SGD illustration; assumptions, not recommended targets
Model Calculation Result
Price allowing a 20% remainder on S$1,500 of listed costs S$1,500 ÷ 0.80 S$1,875
Remainder as a share of price S$375 ÷ S$1,875 20%
Merely add 20% to cost S$1,500 × 1.20 S$1,800; margin 16.67%

The first two rows assume the listed S$1,500 already includes every cost and personal time allowance you chose for this model. Review missing overhead and delivery time before using the result. An own-time allowance is a pricing assumption, not an automatic sole-proprietor tax deduction. None of these figures guarantees a client’s acceptance, cash collection or a tax result.

Use the free tools for the next step

  1. Use the hourly-rate calculator to explore a revenue target, realistic billable weeks and hours. It does not choose a market price or assess tax.
  2. Keep actual hours in your own copy of the timesheet worksheet, then compare the project with your estimate.
  3. Enter the agreed fee and deliverables in the free quotation or invoice generator. It is for non-GST-registered suppliers in SGD and does not save history or track payments.
  4. Use the income-and-expense calculator for cash actually received and business costs actually paid in a consistent period. Its cash margin is not an accounting profit margin or tax result.

Would a simple project-fee worksheet or reusable estimates help? Use the optional feedback form on the home page to say so. Our current tools require no account; saved projects are not offered.

Converting between margin and markup

People often quote one and mean the other. The conversion is simple. Markup = margin ÷ (1 − margin), where both are written as decimals. Margin = markup ÷ (1 + markup). The first example above gives a 60% margin and a 150% markup, and the formula agrees: 0.60 ÷ 0.40 = 1.50.

Margin and the markup it implies, on a defined cost base
Margin Markup
20% 25%
30% 42.86%
40% 66.67%
50% 100%
60% 150%

A 25% markup is a 20% margin, not a 25% margin. If a client or supplier says “we work to a 20% margin”, add 25% to your costs, not 20%. If they say “20% markup”, the margin is 20 ÷ 120, or about 16.67%, which matches the last row of the earlier table.

A second worked example: a project with two kinds of cost

Take a project with a S$3,200 fee. Two kinds of external cost are listed: S$900 paid to a subcontractor and S$100 for software used only on this job. You expect to spend 38 hours of your own time. All figures are invented.

Second illustration, SGD
Question Calculation Result
External costs listed S$900 + S$100 S$1,000
Remainder after those costs S$3,200 − S$1,000 S$2,200
Remainder as a share of the fee S$2,200 ÷ S$3,200 68.75%
Remainder as a percentage of the costs S$2,200 ÷ S$1,000 220%
Remainder per hour of your time S$2,200 ÷ 38 about S$57.89

Now turn it around. If your own pricing allowance is S$50 an hour, 38 hours needs S$1,900. Add the S$1,000 of costs and the fee that covers both is S$2,900. The S$3,200 fee clears that by S$300, which could cover overhead you have not listed or a revision that takes longer than planned. Whether S$300 is enough is a judgement about this job and this client, not something the formula decides.

What a discount does to the remainder

A discount comes off the remainder, not off the costs. In the very first example, a S$2,000 fee left S$1,200 after S$800 of costs. A 10% discount takes the fee to S$1,800 and the remainder to S$1,000. The remainder falls by S$200 out of S$1,200, which is about 16.7%, and the amount per hour over 30 hours falls from S$40 to about S$33.33. A 10% discount on the fee is therefore a larger cut to what you keep. Costs do not shrink because the client was given a discount.

A simple allowance for the unexpected

If you are unsure about the hours, price on a stated assumption and say so in the quotation. As an illustration, if you expect 30 hours and add a margin of safety of 10% to the time, you plan on 33. Spread over a S$1,200 remainder, that is about S$36.36 an hour instead of S$40. Whether you add a safety margin, and how large, is your decision. The point is to choose it deliberately rather than discover it after the work is done.

Common project pricing mistakes

  • Counting only the time spent on the work itself and ignoring proposal writing, preparation and administration.
  • Using margin and markup interchangeably.
  • Leaving out costs you will pay before the client pays you.
  • Offering a discount without recalculating what remains per hour.
  • Pricing a fixed fee on a best-case estimate of the hours.
  • Presenting a project-level remainder as the business’s profit.
  • Adding a safety margin you never tell the client about, or allow for, when scope grows.

Records to keep

For each project, keep the estimate you used, the quotation, the supplier invoices for the external costs, your timesheet, and the invoices and receipts that followed. IRAS’s non-GST guide lists invoices and receipts received as proof of business expenses among the records to keep, and says records should be retained for five years. IRAS’s page on business expenses says the expenses a sole proprietor claims must be incurred wholly and exclusively to generate business income, and lists your own salary, allowances, MediSave and CPF contributions, and personal drawings among those that are not deductible. So the pricing allowance you give yourself is a way to judge a quotation. It is not a cost you claim.

If your situation differs

You are GST-registered. The examples assume no GST. IRAS says only registered businesses can charge GST. If you are registered, decide whether your quoted prices include or exclude it and show it as IRAS’s GST guidance describes.

You price by value rather than cost. Some jobs are worth much more to the client than the cost-plus method suggests. The worksheet still helps as a floor: it shows the lowest fee that covers your listed costs and your time allowance.

You have recurring work with the same client. Look at the whole relationship over several months, not each job separately. A low-margin job that leads to steady work can still make sense, if you decide so deliberately.

You have a subcontractor. Include their cost in your external costs and check what is in their quote before you rely on it. If they are late or change their price, your margin is the first thing to go.

Frequently asked questions

What margin should I aim for?

This guide does not recommend one. A target depends on your costs, your time, your reserve goals and your market. The worksheet helps you see what a given margin means in dollars.

Is margin the same as profit?

No. ACRA’s financial-ratio page defines net profit margin as profit after all costs and tax, divided by revenue, times 100. A project-level remainder that counts only some costs is not that measure.

Should I charge by the hour or by the project?

Hourly pricing suits uncertain scope. A fixed fee suits a clearly defined deliverable. Whichever you choose, record your hours so you can learn from them.

How do I price a revision round?

Decide how many are included, and price any extra before doing it. The quotation checklist shows an example of three extra hours.

Can I deduct my own time as a business expense?

IRAS’s business-expenses page lists a sole proprietor’s own salary, allowances and personal drawings among non-deductible items. The allowance in this worksheet is only a pricing aid.

Does the hourly rate calculator pick a price for me?

No. It converts an income target, business costs and a reserve goal into hourly and daily rates. What a client will pay is a separate question.

Sources and checks

The 4 pages below were fetched on 22 November 2026 for this pricing guide. Anything not listed was not re-checked.

Illustrative only, not tax or financial advice. No fee, margin or hourly allowance is recommended. All figures are invented and the arithmetic was checked on 22 November 2026.

Try it with your own numbers. The money planner is free, runs in your browser and saves nothing.

Open the money planner